Nidec
|
Product overview
Nidec product overview
In coffee/espresso machines for the food service sector, our motors are used both for the high-speed coffee grinder and for the pressing function.
Up to 10 Nidec DC micromotors perform functions such as paper lift, paper feed, sorter, etc. in one copier. The motors meet high requirements in terms of temperature resistance and reliability to minimize maintenance.
For the operation of gates and barriers, Nidec DC motors have clear advantages over AC motors:
- High tightening torque
- good control characteristics
Our motors are often used for adjustment functions in residential furniture as well as in hospitals and nursing homes, as they meet the special requirements of these areas. A patient lifting device represents a considerable facilitation of home care. Here, the lifting function is performed by a motor with a two-stage spur gear.
The drive has a diameter of only 43 mm, its drive shaft is located in the center of the gearbox - it can therefore be installed directly in the telescopic unit. The motor is interference suppressed and low-noise.
- Rated voltage: 12 - 42 VDC
- Nominal torque: up to 20 Nm
- Idle speed: max. 540 min-1
- Increased service life
- integrated 2-channel Hall IC
- noise optimized
- optimal price/performance ratio
- Rated voltage: 12 - 42 VDC
- Nominal torque: 0.2 - 4 Nm
- Idle speed: 17 - 200 min-1
- Increased service life
- integrated 2-channel Hall IC
- noise optimized
- optimal price/performance ratio
Applications
- Coffee machines
- Office machines
- Gate operators
- Window manufacturer
- Nursing Aids
Powerful linear actuators are used in the domestic and industrial sectors for many adjustment functions - typical applications include drives for opening and closing skylights, skylights and conservatory windows. Here, for example, motors of the 0220 GMP series are used
- Nominal torque: 0.05 - 0.4 Nm
- Diameter: 43 - 76 mm
- Idle speed: max. 5,250 min-1
- Plug or stranded wire with plug
